background image

Top Function

The top function allows the first track of the cur-
rent CD to be played.
Press Top button 

4

to play the first track (track

No.1) of CD.

Selecting Tracks (songs)

Press the SRCH Left/Right button 

2

.

: Playback will start from the next track.
: Playback will start from the beginning of

the track currently playing. When this
button is pressed again, the CD will play 
from the previous track.

Fast-Forward and Fast-Backward 

Press and hold the SRCH Left/Right button 

2

.

: To fast-forward
: To fast-backward

*

Pressing the SRCH Left/Right button for 1 second or
longer will move forward or backward 5 times faster
than normal play, and pressing it for 3 seconds or
longer will do the operation 30 times faster.

Scan Play (Intro Music Scan)

Press the SCN button 

5

, then the display

shows “SCN”, then the CD will play the first 10
seconds of each track of the whole disc. Press
the SCN button 

5

again to disengage the unit

from scan play.

*

A scan play will start from the track following the one
currently playing.

Repeat Play

Press the RPT button 

6

, then the display shows

RPT”, then the track currently playing will be
played repeatedly. Press the RPT button 

6

again to disengage the unit from repeat play.

Random Play 

Press the RDM button 

0

, then the display will

show “RDM”, then the entire tracks on the disc
will be played at random. Press the RDM button

0

again to disengage the unit from random play.

CD Changer Operations

When a separately sold CD changer is connect-
ed, it can be controlled from this unit.

Listening to the disc

Press the FUNC button 

3

and select the CD

changer mode, then the CD starts playing.

Stopping (pausing) playback

Press the Play/Pause button 

¥

.

Press the Play/Pause button 

¥

again to resume

playback.

Selecting a CD

Each of the Direct buttons 

@

corresponds to a

disc loaded into the magazine.
• Selecting a disc from 1 to 6
Press the corresponding Direct button 

@

(1 to 6)

to select the desired disc.
• Selecting a magazine from 1 to 3 (only when

there is disc in the magazine)

Press BAND button 

4

to select the desired

magazine.

*

If a CD is not loaded in a slot of the magazine, press-
ing  the Direct button 

@

corresponding to its disc

number is invalid.

Selecting tracks (songs)

Press the SRCH Left/Right button 

2

.

: Playback will start from the next track.
: Playback will start from the beginning of

the track currently playing. When this
button is pressed again, the CD will play
from the previous track.

Fast-forward and fast-backward 

Press and hold the SRCH Left/Right button 

2

.

: To fast-forward
: To fast-backward

*

Pressing the SRCH Left/Right button 

2

for 1 second

or longer will move forward or backward 3 times faster
than normal play, and pressing it for 3 seconds or
longer will do the operation 30 times faster.

14

DX425

English

Summary of Contents for DX425

















Reviews: