DRX9575Rz
15
RDS oprations
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode so you can listen to it. Traffic
programe (TP) automatic tuning is also possible.
∗
This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programes.
●
Setting TA standby mode
If you press TA button
6
when only “TP” is lit in
the display, “TP” and “TA” light in the display and
the unit is set into TA standby mode until a traffic
announcement is broadcast. When a traffic
announcement broadcast starts, “TRA INFO”
appears in the display. If you press TA button
6
while a traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is canceled and the unit goes into TA
standby mode.
●
Canceling TA standby mode
With “TP” and “TA” lit in the display, press TA
button
6
. The “TA” in the display goes off and
TA standby mode is canceled.
∗
If “TP” is not lit, pressing TA button
6
searches
for a TP station.
●
Searching for a TP station
When “TP” is not lit, if you press TA button
6
,
the “TA” in the display lights and the unit
automatically receives a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing TA button
6
again
goes off the “TA” in the display and stops TP station
searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP that can
be received is less than 6, broadcast stations
already stored in memory are left without being
overwritten.
1. With “TA” lit in the display, press S button
#
to display the subdisplay.
2. Press and hold the number “2” of Preset
buttons
$
for 2 seconds or longer. The TP
stations with the good reception sensitivity are
stored into preset memory.
∗
Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
PTY
This function enables you to listen to a broad-
cast of the selected programe type when it starts
even if the unit is ON a function mode other than
radio.
∗
Some countries do not yet have PTY broadcast.
∗
In TA standby mode, a TP station has priority over
a PTY broadcast station.
●
Setting PTY standby mode
1. Press S button
#
to display the subdisplay.
2. When you press the number “6” of Preset
buttons
$
, “PTY” lights in the display and the
PTY standby mode is turned on. When the
selected PTY broadcast starts, the PTY item
name appears in the display.
●
Canceling PTY standby mode
1. Press S button
#
to display the subdisplay.
2. When you press the number “6” of Preset
buttons
$
, “PTY” goes off in the display and
PTY standby mode is canceled.
●
Canceling a PTY interrupt broadcast
1. Press S button
#
during the PTY interrupt
broadcast to display the subdisplay.
2. If you press the number “6” of Preset buttons
$
, the PTY interrupt is canceled and the unit
returns to PTY standby mode.
Selecting PTY
1. Press S button
#
to display the subdisplay.
2. When you press the number “5” of Preset
buttons
$
, the unit goes into PTY select
mode.
3. Press any one of Preset buttons
$
.
Alter natively, tur n the Rotar y knob
3
clockwise or counterclockwise to select the
desired PTY.
∗
Below are the factory default settings stored
for Preset buttons
$
.
4. The PTY select mode is canceled automati-
cally 7 seconds after a PTY is selected.
Preset No.
PTY
1
NEWS
News
2
TOP 40
Top 40
3
COUNTRY
Country music
4
SOFT
Soft music
5
CLASSICL
Classic music
6
R & B
Rhythm and Blues
