Clarion DB178RMP, Owner'S Manual

Page: 24 / 28

23
English
DB178RMP / DB179RMP / DB179RGMP
“ RIGHT ”
Telephone calls can be heard on the front right
speaker connected to this unit.
“
LEFT ”
Telephone calls can be heard on the front left
speaker connected to this unit.
OFF:
This unit continues normal operation even when
the cellular phone is used.
ON:
You can listen to your telephone calls from the
speakers connected to this unit.
MUTE:
The sound from this unit is muted during tele-
phone calls.
Notes:
This unit requires hands-free kit that supports [ AUX
]
input as a source of cellular phone audio input.
Please consult your local authorized Clarion dealer
for more information on the handsfree kit offered.
If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio through
the system.
When listening to your calls on your car speakers,
you can adjust the volume by turning the [ ROTARY
]
knob, it will be memorized as new telephone vol-
ume.
The factory default setting for this volume is “ VOL
15 ”.
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone rings
in the car.
This function is not compatible with all cellular
telephones. Please contact your local authorized
Clarion dealer for information on proper installation
and compatibility.
Other Operations
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold unit, you can listen to your
telephone calls on your car speakers.
∗
The factory default setting is “ OFF ”.
2-1. Select “
TEL-SW
”.
3-1. Turn the [ ROTARY
] knob to select the set-
ting.
Each time you turn the [ ROTARY
] knob, the
setting changes in the following order:
OFF ON MUTE.
Setting the car speaker output for the
cellular phone
∗
The factory default setting is “ RIGHT ”.
∗
To output the telephone calls, set the cellular phone
interrupt to ON.
2-1. Select “ TEL-SP ”.
3-1. Turn the [ ROTARY
] knob to select “
RIGHT ”
or “ LEFT ”.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗
The factory default setting is “ MID ”.
2-1. Select “ AUX SENS ”.
3-1. Turn the [ ROTARY
] knob to select “
LOW ”,
“ MID ” or “ HIGH ”.
Note:
For telephone interrupt, AUX SENS is always
" MID ".