English
12
Select tuner as playing source
Press [SRC /
] button once or more to
enter RADIO mode.
Select one radio band
Press the [BAND
] button on the panel or on
the remote control to select one radio band
among FM1, FM2, FM3 and AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
] or [
]
button on the
panel to tune in a higher / lower station.
Press the [
] or [
]
button on the
remote control to tune in preset stations.
Auto tuning
Press and hold the [
] or [
]
button to
seek a higher / lower station.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the [PS/AS
] button.
2. When a desired station is tuned in, press
the [PS/AS
] button again to continue
receiving that station.
Note:
Be careful not to press and hold the [PS/AS]
button for 1 second or longer, otherwise the
auto store function is engaged and the unit
starts storing stations.
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS
] button (1 sec.)
to
start automatic station search.
To stop auto store, press other buttons
having radio functions.
Radio Operations
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each bands can store 6
stations, CZ501A can store 24 stations in
total.
Manual store
When one expected radio station has been
detected, press and hold number button 1-6
to store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [D
] button on the front panel, then
press [
] button repeatedly until
LO or
DX
displays on the screen, rotate the [
VOLUME
]
knob to select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
