English
6
The control panel can be detached to
prevent theft. When detaching the control
panel, store it in the DCP (DETACHABLE
CONTROL PANEL) case to prevent
scratches.
We recommend taking the DCP with you
when leaving the car.
1. Press the [
]
button (2 sec.) to turn off
the power.
2. Depress the [
OPEN] button to unlock the
DCP.
3.
Grab the edge that pops out and remove
the DCP.
1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
Hold the DCP, in the orientation as shown in
the figure below, and put it into the supplied
DCP case. (Ensure the DCP is in the correct
orientation.)
Storing the DCP in the DCP Case
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be carefully not
to drop it or subject it to strong shocks.
• Once the [
OPEN
] button is pressed and
DCP is unlocked, car vibrations can cause
the DCP to fall.
• The connector connecting the source
unit and the DCP is an extremely
important part. Be careful not to damage
it by pressing on it with fingernails,
screwdrivers, or other hard objects.
Note:
If the DCP is dirty, wipe off the dirt with a soft,
dry cloth only.
Remove the DCP
Re-attach the DCP
DCP
DCP case
01_Eng_CZ500A CAP.indd 6
2009-12-26 10:03:57
