Clarion CZ215E, Owner'S Manual

Page: 13 / 25

System Setup
13
CZ215E/CZ315E
English
display, then turn [ ROTARY ] knob to
choose one of the paired devices.
3. Press [ ROTARY ] knob.
4. Turn [ ROTARY ] knob to select
“ CANCEL ” or “ ARE U SURE ”, and
press [ ROTARY ] knob.
CANCEL : cancel deleting the paired
device.
ARE U SURE : confirm to delete the
paired device.
Notes:
•฀ Deleted฀paired฀device฀will฀not฀automatically฀
rearrange฀in฀the฀paired฀device฀list.
•฀ After฀deleting฀the฀device,฀the฀phone฀book฀
and฀the฀call฀history฀records฀will฀be฀deleted฀
too.
Disconnect Device
This option is used to disconnect the
currently connected device.
1. Select “
BT DISCON ” in system setup
items, and press [ ROTARY ] knob.
2. Press and turn the [ ROTARY ] knob to
select “ ARE U SURE ” or “ CANCEL ”.
ARE U SURE : confirm to disconnect
the paired device.
CANCEL : cancel disconnecting the
paired device.
3. Press the [ ROTARY ] knob to confirm.
Auto Answer
This is a setting to determine whether
any incoming call will be automatically or
manually answered.
∗
The factory default setting is “ OFF ”.
1. Select “ A-ANSWER ” in system setup
items.
2. Turn [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
ON : Any incoming call is automatically
answered in 5 seconds.
OFF : User needs to manually answer
the call.
Auto Connect
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗
The factory default setting is “ ON ”.
1. Select “ A-CONNECT ” in system setup
items.
2. Turn [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
Priority for Phonebook
Download
Setting the priority for the phonebook
download automatically while pairing.
∗
The factory default setting is “ DEVICE ”.
1. Select “ TEL MEMORY ” in system setup
items.
2. Turn [ ROTARY ] knob to select the
setting: DEVICE/SIM.
DEVICE: Phonebook download from
device firstly.
SIM: Phonebook download from SIM
card firstly.
Pin Code Setting
This pin code is used during pairing. A
maximum of 10 digits can be changed
through this unit.
∗
The factory default pass key is “ 1234 ”.
1. Select “ PIN CODE ” in system setup
items.
2. Press [ ROTARY ] knob.
3. Press [ x ] or [ v ] button to move the
cursor.
4. Turn [ ROTARY ] knob to select the
desired digits.
5. Long press [ ROTARY ] knob to store in
memory.
Performing Memory Reset
Reset various settings in the memory.
Note:
•฀ The฀settings฀will฀remain฀in฀the฀memory฀
even฀if฀you฀turn฀the฀power฀off฀.
1. Select “ RESET ” in system setup items,
and press [ ROTARY ] knob.
2. Turn [ ROTARY ] knob to select
“ CANCLE ” or “ ARE U SURE ”, and
press [ ROTARY ] knob.
CANCEL : cancel resetting
ARE U SURE : “ CLEARED ” appears
in the display, and the memory will be
cleared.
CZ315E&CZ215E Owner's Guide A6 1112.indd 13 2015/01/09 9:25:38