Clarion CZ209E, Owner'S Manual

Page: 15 / 23

English
15
CZ209E/CZ209ER/CZ209EG
●
Setting title scroll method
Set how to scroll in CD-TEXT and MP3/WMA
titles.
∗
The factory default setting is “ ON ”.
2-1. Select “ SCROLL ”.
3-1. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
• ON: Scroll automatically.
• OFF: Scroll 1 time only.
●
Setting dimmer control
Dimmer control can be set “ ON ” or “ OFF ”.
∗
The factory default setting is “ ON ”.
2-1. Select “ DIMMER ”.
3-1. Turn the [ ROTARY ] knob to select “ ON ” or
“
OFF
”.
●
Setting car speaker output for cell
phones
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT373) (sold
separately):
∗
The factory default setting is “ RIGHT ”.
∗
To output the telephone calls, set cell phone
interrupt to “
ON ”.
2-1. Select “ TEL-SP ”.
3-1. Turn the [ ROTARY ] knob to select “ RIGHT ”
or “ LEFT ”.
• RIGHT: Telephone calls can be heard on
the front right speaker connected to this
unit.
• LEFT: Telephone calls can be heard on
the front left speaker connected to this
unit.
●
Cell phone interrupt setting
If you connect this unit and your cell phone with
an optional cable, you can listen to your calls on
your car speakers.
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT373) (sold
separately):
∗
The factory default setting is “ OFF ”.
2-1. Select “ TEL-SW ”.
3-1. Turn the [ ROTARY ] knob to select setting.
When turning the [ ROTARY ] knob, the
setting changes as follows:
“ OFF ”
↔
“ ON ”
↔
“ MUTE ”
• OFF: This unit continues normal
operation even when the cell phone is
used.
•
ON:
Telephone calls can be heard from
the speakers connected to the unit.
∗
When listening to calls on your car speakers,
turn the [
ROTARY ] knob to adjust the
volume.
• MUTE: The sound from this unit is muted
during telephone calls.
Note:
• If connecting a hands-free kit, make sure the
setting is ON to receive telephone audio through
the system.
AUX function
An external input jack (AUX) is provided on the
front panel to allow playback of sound and
music from external devices.
●
Selecting AUX IN sensitivity
Make the following settings to adjust sensitivity
when the sound from an external device is
difficult to hear even after adjusting the volume.
∗
The factory default setting is “
MID
”.
1. Press and hold the [
DISP
] button (1 sec.).
2. Select “ AUX SENS ”.
3. Turn the [ ROTARY ] knob to select “ HIGH ”,
“ MID ” or “ LOW ”.
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
Downloaded from Caradio-Manual.com Manuals