English
9
CZ202A/CZ202AR
Press [
SRC /
] button on the panel or remote
control to select “
AUX
”.
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press and hold the [
DISP
] button (1 sec.).
AUX Operations
6. TROUBLE SHOOTING
GENERAL
Problem
Cause
Measure
Unit can not
power on.
Unit fuse blown.
Replace with new fuse of correct rating.
Car battery fuse blown.
Replace with new fuse of correct rating.
Unit can not
power on.
Nothing happens
when buttons are
pressed.
Display is not
accurate.
The microprocessor has
malfunctioned due to noise, etc.
Turn off the power and remove the DCP.
Press the [
RESET
] button with a thin rod.
Note:
When the [
RESET
] button is pressed, turn off
the ACC power.*
* When the [
RESET
] button is pressed, preset
radio stations, titles, etc. stored in memory are
cleared.
Remote control
does not work.
Battery depleted.
Change the battery.
Battery installed incorrectly.
Install the battery correctly.
No/low audio
output.
Improper audio output connection. Check wiring and correct.
Volume set too low.
Increase volume level.
Speakers damaged.
Replace speakers.
Heavily biased volume balance.
Adjust the channel balance to center position.
Speaker wiring is in contact with
metal part of car.
Insulate all speaker wiring connections.
Poor sound quality
or distortion.
Non-standard disc used.
Use a standard disc.
Speaker power rating does not
match unit.
Replace speakers.
Wrong connections.
Check wiring and correct.
Speaker is shorted.
Check wiring and correct.
Tel-Mute
malfunction.
MUTE wire is grounded.
Check the MUTE wiring and correct.
Unit resets itself
when engine
is off.
Incorrect connection between
ACC and Battery.
Check wiring and correct.
2. Turn the [
VOLUME
] knob to select “
AUX
SENS
”.
3. If the output level of connected external
audio player is “
HIGH
”, rotate [
VOLUME]
knob and choose “
LOW
”. And if the output
level is “
LOW
”, choose “
HIGH
”.
DISC Player
Problem
Cause
Measure
Disc cannot be
loaded.
Another disc is already loaded.
Eject the disc before loading the new
one.
There is an object install inside
the unit.
Remove the object inside the unit.
Sound skips or is
noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heavily scratched
or warped.
Replace with a compact disc with no
scratches.
Sound is bad
when power is first
turned on.
Condensation may form on the
internal lens when the car is
parked in a humid place.
Let dry for about 1 hour with power on.
iPod & iPhone Operations
2. Press the
[ 3 ]
button once or more until
“SONG RDM
” appears on the LCD to
perform random play.
3. Press
[ 3 ]
button repeatedly until “
RDM
OFF
” appears on the LCD to cancel random
playback.
Setting iPod simple control mode
Use this function if you wish to operate through
your iPod connected to this unit via the USB
cable.
* The factory default setting is “
OFF “.
1. Press and hold [
DISP ]
button to enter
system setup.
2 Press [
] or [
] button to select
“ S-CTRL“.
3. Rotate the
[VOLUME]
knob to select
“ ON “ or “ OFF “ .
•
ON
: Operations are made through your iPod.
•
OFF
: Operations cannot be made through
your iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are performed
too quickly, Unforeseen errors may occur.
• When performing iPod operations using
simple control mode, please do not operate
the iPod and the unit at the same time,
otherwise there may be unexpected event
happened.
• Some iPod models do not support this
function. Consult your nearest
Clarion
dealer or website to confirm which models
do not support this function.
iPod menu alphabet search
This function searches the subfolders for
desired alphabetical letters.
1.
Press the
[MENU]
button to select the iPod
menu mode.
2. Press the
[VOLUME]
knob to switch
between categories.
MUSIC: PLAYLIST, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS, TV
SHOWS VIDEO
PODCASTS, RENTALS
3. Press the
[VOLUME]
knob. (The contents
of the category are displayed.)
4.
Press and hold the
[ DISP ]
button (1 sec.).
5.
Rotate the
[VOLUME]
knob to select the
desired letter to search.
6.
Press the
[ DISP ]
button again to next
perform search.
7. Press the [
VOLUME
] knob to confirm.
