English
10
Select tuner as playing source
Press [
SRC
] button once or more to enter
radio mode.
Select one radio band
Press the [
BAND
] key on the panel or [
BND
]
key on the remote control to select one radio
band among FM1, FM2, FM3, AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
]/[
] key on the panel to
tune in a higher / lower station.
Auto tuning
Press and hold the [
]/[
] key on the
panel or remote control to seek a higher /
lower station.
To stop searching, repeat the operation
above or press other keys having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [
PS/AS
] (2 sec.) to start
automatic station search.
To stop auto store, press other keys having
radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each bands can store 6
stations, CZ100A can store 24 stations in
total.
Radio Operations
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the [
PS/AS
] button.
2. When a desired station is tuned in, press
the [
PS/AS
] button again to continue
receiving that station.
Note:
Be careful not to press and hold the [
PS/AS
]
button for 2 seconds or longer, otherwise the
auto store function is engaged and the unit
starts storing stations.
Manual store
When one expected radio station has been
detected, press and hold number key 1~6 to
store it in the memory.
Recall the stored stations
Press one numeric key among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [
ADJ
] key on the front panel, then
press [
] key repeatedly until LO or DX
displays on the screen, and rotate the knob
to select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
