English
9
CMD8
Select tuner as playing source
Press
[AM/FM]
button once or more to enter
RADIO
mode.
Changing the reception area
This unit is initially set to USA frequency
intervals of 10 kHz for AM and 200 kHz for
FM. When using it outside the USA, the
frequency reception range can be switched
to the intervals below.
U.S.
standard
Other
countries
Europe
standard
AM
Frequency
spacing
10 kHz
9 kHz
9 kHz
Frequency
range
530 to 1,710
kHz
531 to
1,629kHz
531 to 1,602
kHz
FM
Frequency
spacing
200kHz
50kHz
50kHz
Frequency
range
87.9 to
107.9MHz
87.5 to 108
MHz
87.5 to 108
MHz
Setting the reception area
* All station preset memories are lost when
the reception area is changed.
1. Press the [
AM/FM
] button and select the
desired radio band (FM or AM).
2. Press the [
OPTION
] button.
3. Press the [
] or [
] button to select “
TUN
AREA
”.
4. Rotate the [
UP/DOWN
] knob to select:
• U: U.S. standard (initial setting)
• K: Other countries
• E: Europe standard
5. Press and hold the [
ENTER
] button to
store the selecting.
• The unit will turn off after setting.
Selecting the radio band
Press the
[AM/FM]
button on the front panel
or the
[BAND / TOP]
on the remote control
to select one radio band among FM1, FM2,
FM3, AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the
[ ]
or
[ ]
button on the panel to
tune in a lower / higher station.
Radio Operations
Radio Operations
Press the
[
] or [
]
button on the remote
control to select preset stations.
Auto tuning
Press and hold the
[ / ]
button on the
panel or
[
/
]
button on the remote
control to seek a lower / higher station.
To stop searching, repeat the operation above
or press other buttons having radio functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the
[OPTION]
button.
2. Press the
[ ] or [ ]
button to select
“PRESET SCN
”.
3. Press the
[ENTER]
button.
* When a desired station is tuned in,
press the
[ENTER]
button to continue
receiving that station.
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
1. Press the
[AM/FM]
button and select the
desired band (FM or AM).
2. Press the
[OPTION]
button.
3. Press the
[ ] or [ ]
button to select
“AUTO STORE
”.
4. Press and hold the [
ENTER
] button (1
sec.) to start automatic station search.
To stop auto store, press other buttons
having radio functions.
Notes:
1. After auto store, the previous stored stations
will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store by AS
function. Each band can store 6 stations,
M303 can store 24 stations in total.
Manual store
1. Select the desired station with seek
tuning or manual tuning.
2. Press the
[MENU]
button
3. Rotate the
[UP/DOWN]
knob to select a
desired station.
4. Press and hold the
[ENTER]
button
to store the current station into preset
memory.
Recall the stored stations
A total of 24 preset positions (6-FM1, 6-FM2,
6-FM3, 6-AM) exists to store individual radio
stations in memory.
1. Press the
[AM/FM]
button and select the
radio band.
2. Press the
[MENU]
button.
3. Rotate the
[UP/DOWN]
knob to select the
desired preset station.
4. Press the
[ENTER]
button to recall the
stored frequency.
SiriusXM Satallite Radio Operations
Everything worth listening to is on SiriusXM,
getting over 130 channels, including the
most commercial-free music, plus the best
sports, news, talk and entertainment. To
start listening to the SiriusXM™ Satellite
Radio, a SiriusXM Vehicle Tuner (purchased
separately) and Subscription are required.
Displaying the Radio ID
Before you listen to satellite radio, you must
subscribe to the service using the SiriusXM
Radio ID number.
1. Press
[ SAT ]
button to activate SiriusXM-
mode.
2. Press
the
[ / ]
button on the front panel
or the
marine wired remote control to select
channel “0”.
The unit displays Radio ID.
Notes:
1. The Radio ID is located on the bottom of
the SiriusXM Connect Vehicle Tuner.
2. Please note that the SiriusXM Radio ID
does not include the letters I, O, S or F.
3. Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
• Online: Go to “www.siriusxm.com/
activatenow”.
• Phone: Call 1-866-635-2349.
• To activate SiriusXM Canada service
go to www.xmradio.ca and click on
“ACTIVATE RADIO” in the top right
corner, or call 1-877-438-9677
Storing Channel Presets
1. Press
[SAT]
button on the front panel or
the
[BAND / TOP]
on the remote control or
the
[MENU / BAND] on
the
marine wired
remote control to select the desired band
you want to store the preset in.
There are 3 Satellite Radio Preset bands.
Each press of
[SAT] or [BAND / TOP] or
Note:
After the band selecting, you can also rotate
the
[UP/DOWN]
knob to select a desired
preset station.
Local seeking
When LOCAL seeking is ON, only those
radio
stations with strong radio signal could be received.
To select LOCAL function, press the
[ADJUST]
button on the front panel or press
and hold the
[ DISP ]
button on the remote
control, then press
[ ]
button on the front
panel or
[
]
button on the remote control
repeatedly until
DX / LO
displays on the
screen, and rotate the
[UP/DOWN]
knob to
select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is ON.
