CCUMRA2
When will I need the CCUMRA2?
If replacement remote has 6-pins and
“
BOAT CABLE
”
has 6-pin, no adapter
required; however, if replacement remote has 8-pin (See
Fig. 3
) and
“
BOAT
CABLE
”
or OLD RADIO has 6-pins (See
Fig. 4
), the CCUMRA2 is required.
So, upgrading remote and keeping old radio requires the CCUMRA2.
CCUMRA2 installs between 6-pin
“
BOAT CABLE
”
and new 8-pin remote.
Warning:
LCD display on new remote remains blank, but buttons remain
functional.
Fig. 3
Fig. 4
CCUMRA1 and CCUMRA2
When will I need both the CCUMRA1 and CCUMRA2?
You will need both cables when replacing radio and remote.
If new radio and new remote have 8-pin connections, and
“
BOAT CABLE
”
has 6,
both the CCUMRA1 and CCUMRA2 required.
The CCUMRA1 installs between new radio and “
BOAT CABLE
” and the CCUMRA2
installs between “
BOAT CABLE
” and new remote.
(See
Fig. 5)
Fig. 5
Warning for LCD remotes
: Once the CCUMRA1 or CCUMRA2 are
installed, any and all remotes with LCD display will go blank, however
the buttons (e.g., VOL±, track up/down etc. remain functional.
