CC4100E
ULTRA COMPACT COLOR CAMERA with Heavy Duty
Mounting Bracket and Metal Shroud
Installation manual
Printed in China 20011/6 274-0383-00
1. FEATURES
■
High-performance 1/4" color CMOS sensor
■
130° (horizontal) wide-angle lens, allowing broad field of view
■
Mirror-image inversion function presents optimum conditions for confirming rear view
(same right-left orientation as seen through a rear-view mirror)
■
Small size and weight for easy installation
2. PRECAUTIONS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/
TV technician for help.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER
WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.
• This device has been designed exclusively for use with a vehicular mounted rear-view television
system. It should not be used for other purposes.
• Disconnect the vehicle’s negative (–) terminal when installing wiring.
• Do not attempt to disassemble or modify this product.
• In the event it is necessary to drill holes in the vehicle for mounting, confirm that the drill bit or
camera wiring will not strike or interfere with piping, gas tank, electrical wiring or other functional
parts of the vehicle.
• Do not rely solely on the monitor image when reversing the vehicle.
The rear-view monitor is an auxiliary device meant for confirming the presence of obstacles to the
rear of the vehicle, and is limited in its range. It should be used only in conjunction with direct visual
observations.
• Always reverse at low speeds.
The rear-view monitor produces a wide-angle image, with the result that actual distances may be
different than they subjectively appear in the monitor.
• Do not use when the imaging surface or other parts are malfunctioning.
• When installation and wiring are completed, confirm that the vehicle’s horn, brake and warning
lights, and other electrical equipment function properly as designed.
• Install only as directed in the Installation Manual.
• Install accessory parts as directed.
• When drilling holes in the vehicle for installation of wiring, always use insulated grommets in the
holes to protect the wiring.
• If holes are drilled in the vehicle to install the camera, or when installing wiring, use silicon
sealant to seal any gaps.
• Do not damage or scar the camera wiring.
• After completing the camera wiring, use cable clamps or insulation tape to bundle the wiring
together.
• The images produced from the rear-view monitor are inverted right-left in the same way as
images seen in the vehicle’s rear-view mirrors. The image may differ depending on the vehicle
type.
• Do not use high-pressure car washing devices around the camera.
The camera is a high-precision instrument and should not be subjected to high-pressure water
stream impacts.
• Periodically check the tightness of the installation screws and retighten if necessary.
WARNING
CAUTION
3. PACKAGE CONTENTS
1
Camera (with 0.5 m cable) ............................. 1
2
Mounting bracket ............................................ 1
3
Protective cover .............................................. 1
4
Installation screws (hex head M3 x 6) ............ 2
1
2
3
5
8
7
6
4
5
Installation screws (hex head M3 x 15) .......... 2
6
Installation screws (pan head M3 x 7) ............ 2
7
Flange nuts (M3) ............................................ 2
8
Owner’s manual & Installation manual ........... 1
4. INSTALLATION
Before installation
• Before installing the camera or its wiring, read all safety warnings and be sure to install the unit correctly.
• Before installing the camera permanently, use adhesive tape to mount the camera in its proposed
position, then check the image in the monitor to confirm proper display before fixing the camera in its
final position.
• Disconnect the battery’s negative (–) terminal installing wiring.
Installing the camera
1. Attach mounting bracket to vehicle
Using two installation screws (hex head M3 x 15), attach the mounting bracket to the vehicle.
Mounting bracket
Flange nuts (M3)
Installation screws
(hex head M3 x 15)
2. Attach the protective cover to the camera
Use two installation screws (pan head M3 x 7) to attach the protective cover to the camera
body.
Protective cover
Camera
Installation screws (pan head M3 x 7)
3. Attach the camera to the mounting bracket
Using two installation screws (hex head M3 x 6), attach the camera to the mounting bracket
as shown. Adjust the angle of the camera as desired before tightening the screws holding the
protective cover to the mounting bracket.
Mounting bracket
Installation screws
(hex head M3 x 6)
Camera
Protective cover
• When adjusting the camera position, do not allow the camera cable to be excessively stretched
or loose.
• Periodically check the tightness of the installation screws and retighten if necessary.
■
Adjusting camera angle (example)
When the camera angle has been changed, the range displayed by the image on the monitor will
change. Always confirm by direct observation when backing the vehicle.
37.5°
WARNING
CAUTION
CAUTION
Precaution:
• Take care not to damage the camera
body when installing the cover.
