280-7452-00
ADX5655z
15
●
Listening to another source while using FF
or REW (“monitor mode”)
To listen to the CD, CD/MD changer or AM/FM
tuner while the mechanism searches, press
FUNC button
7
to select the desired mode. The
mechanism will stop automatically when the end
of the tape is reached.
Note:
• Use FUNC button
7
and select the tape function
to resume tape playback.
APC
(Auto Program Control)
function
The APC function allows the tape to skip forward
to the beginning of the next track or rewind to the
start of the current track.
●
Skipping forward to the next track (“APC-
FF”)
During tape playback, press Right button
¥
twice
to fast-forward to the next track. The next track
stars playing.
●
Skipping backward to the current track
(“APC-REW”)
During tape playback, press Left button
%
twice
to rewind to the start of the current track. The
current track plays from the beginning.
●
Canceling FF/REW APC to resume playback
Press Play/pause button
@
.
●
Listening to another source while using
APC (“monitor mode”)
To listen to the CD, CD/MD changer or AM/FM
tuner while the mechanism searches, press
FUNC button
7
to select the desired mode. The
mechanism will stop automatically when it finds
the next track (in FF APC) or the start of the cur-
rent track (in REW APC).
Note:
• Use FUNC button
7
and select the tape function
to resume tape playback.
Dolby noise reduction system
The Dolby noise reduction system increases the
volume level of high frequency sounds during
recording and sets it back to their original level
during play. This system reduces hissing noise
which is typical of cassette tapes.
∗
Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
Press B NR button
8
to select Dolby noise re-
duction. “B NR” lights in the display. Each time
you press B NR button
8
, the Dolby toggles
between B NR and OFF.
Intro tape scan play
The intro tape scan allows the first 10 seconds of
all the tracks on the tape to be played. This func-
tion continues on the tape until it is canceled.
1. Press SCN button
5
to start Intro tape scan.
“SCAN” lights in the display.
2. To cancel the intro tape scan, press SCN but-
ton
5
again. “SCAN” goes off from the dis-
play and the current track continues to play.
∗
When the end of the tape is reached during
the intro tape scan, the tape mechanism auto-
matically reverses direction and continues the
intro tape scan.
∗
If you select another mode during the intro tape
scan, the mechanism automatically makes the
intro tape scan stop when it finds the next track
(APC function).
Tape repeat play
The tape repeat continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press RPT button
6
. “REPEAT” lights in the
display and the current track is repeated.
2. To cancel the repeat play, press RPT button
6
again. “REPEAT” goes off from the display
and normal play resumes.
Blank tape skip
The blank tape skip allows you to skip blank sec-
tions of tape that are over 12 seconds long.
1. Press and hold RPT button
6
for 1 second
or longer. “BLS” lights in the display and the
mechanism fastforward to the next track se-
lection.
2. To cancel the blank tape skip, press and hold
RPT button
6
again. “BLS” goes off and nor-
mal play resumes.
Notes:
The APC, intro tape scan, tape repeat and blank
skip may not work properly with tapes of the follow-
ing qualities:
• Tapes on which the recording level is too low.
• Tapes on which there is much noise between se-
lections.
• Tapes on which there are long pauses in the middle
of selections.
• Tapes on which there are less than 4 seconds of
blank space between selections.
Tape Operations
