Clarion Addzest DVH920, Owner'S Manual

Page: 6 / 68

10
DVH920
280-7805-00
Turning speakers on or off (SP-SEL)
The center speaker, rear (surround) speakers
and sub woofer have to be set to on or off to
achieve maximum sound quality.
• The initial setting is [ ON ].
1. Press and hold the [ ADJ ] button for 1 second
or longer to enter adjust mode.
2. Press the [
a
] or [
d
] button to change to the
[ SP-SEL ] display.
3. Press the [ ENT ] button to display the adjust-
ment item.
Press the [
a
] or [
d
] button to select [ CEN-
TER-SP ], [ SURROUND-SP ] or [ SUB-
WOOFER ].
• CENTER-SP : center speaker
• SURROUND-SP : rear (surround) speaker
• SUB-WOOFER : subwoofer
4. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise to select [ ON ] or [ OFF ].
• ON : Speaker installed
• OFF : Speaker not installed
• When a sub woofer is used, set [ ON+ ], [ ON- ]
or [ OFF ]. The normal setting is [ ON+ ], but
use the [ ON- ] setting when this provides a
better effect for low frequency range.
5. Press the [ ADJ ] button to return to the origi-
nal mode.
Setting speaker filter frequency
(FILTER)
This function is used to set a filter frequency that
suits the frequency characteristics of the used
speakers.
• The initial value of [ FRONT HPF ], [ SRD HPF ]
is [ THRGH ] (no filter).
• The initial value of [ CENTER HPF ], [ SUB-W
LPF ] is [ 120 Hz ]
• A speaker that was turned off in the Section
“Turning speakers on or off (SP-SEL)” is not
displayed.
1. Press and hold the [ ADJ ] button for 1 second
or longer to enter adjust mode.
2. Press the [
a
] or [
d
] button to change to the
[ FILTER ] display.
3. Press the [ ENT ] button to display the adjust-
ment item.
4. Press the [
a
] or [
d
] button to select the
speaker to adjust.
• FRONT HPF : high pass filter for front speak-
ers
• CENTER HPF : high pass filter for the cen-
ter speaker
• SRD HPF : high pass filter for the rear (sur-
round) speakers
• SUB-W LPF : low pass filter for the sub-
woofer
5. Turn the [ ROTARY ] knob clockwise or coun-
terclockwise to select the frequency.
• In case of [ FRONT HPF ] and [ SRD HPF ],
the frequency is 50 Hz, 80 Hz, 120 Hz and
[
THRGH ] (no filter).
• In case of [ SUB-W LPF ], [ CENTER HPF ] the
frequency is 50 Hz, 80 Hz or 120 Hz.
6. Press the [ ADJ ] button to return to the origi-
nal mode.
Adjusting speaker output level
(SP-GAIN)
Use the built-in test tone function of the unit to
adjust the speaker output level to the same level.
• The initial value is [ 0 dB ].
• A speaker that was turned off in the Section
“Turning speakers on or off (SP-SEL)” is not
displayed.
1. Press and hold the [ ADJ ] button for 1 second
or longer to enter adjust mode.
2. Press the [
a
] or [
d
] button to change to the
[ SP-GAIN ] display.
3. Press the [ ENT ] button to display the adjust-
ment item.
• In the adjustment mode, the test tone is out-
put from the selected speaker.
4. Press the [
a
] or [
d
] button to select the
speaker to adjust.
• Each time the [ DISP ] button is pressed, the
indications change as shown below.
FRONT- : front left speaker
CENTER : front center speaker
FRONT- : front right speaker
SURROUND : right rear (surround)
speaker
SURROUND : left rear (surround) speaker
SUB-WOOFER : rear subwoofer
Setting Acoustic Features (DXZ925)
280-7805-00_09-20 (En) 2/21/02, 4:13 PM 10