Clarion AB243R, Owner'S Manual

Page: 5 / 82

Switching display
While pressing the BAND button
6
, press the
DISP button
%
to select the desired display.
The display switches in the following order:
Main
➜
Clock (CT)
➜
Main ...
7
English
AB243R/AB243RG
Basic Operations
* If the display is changed by other button operation
when the clock (CT) is displayed, the clock display
returns automatically after the operation.
* The example shows the display in radio mode.
Radio Operations
Listening to the radio
1) To tune in a station, first use the BAND but-
ton
6
to select FM (FM1, FM2, FM3, FM4)
or AM (MW/LW).
The band switches as follows each time the
BAND button
6
is pressed:
FM1
➜
FM2
➜
FM3
➜
FM4
➜
AM
➜
FM1
(The FM1, FM2, FM3 and FM4 bands are
provided so that a maximum of 20 FM sta-
tions can be preset, but the reception fre-
quency range is the same for all four.)
2) Press the up or down button
1
. Tuning auto-
matically stops at a broadcasting frequency.
(Seek tuning)
Seek tuning
There are two types of seek tuning: DX seek, in
which receivable stations are tuned in order, and
Local seek, in which only stations with good
reception are tuned in.
DX seek
1) Press the BAND button
6
to select the band.
2) Press the up or down button
1
. “ DX ”
appears in the display, and tuning automati-
cally stops at a broadcasting frequency.
Local seek
1) Press the BAND button
6
to select the band.
2) Press the up or down button
1
for 1second
or longer. “ LO ” appears in the display, and
tuning automatically stops at a broadcasting
frequency.
Manual tuning
1) Press the BAND button
6
to select the band.
2) Press the BAND button
6
for 2 seconds or
longer.
3) “ MAN ” appears in the display, and manual
tuning is possible.
4) Use the up or down buttons
1
to tune in sta-
tions.
*
The mode automatically switches back to the
seek tuning mode after 7 seconds.