Quick Start Manual
Page 5
2 Getting started
Figure 1: Koala EVM PCB Layout
1. The Koala EVM must be supplied with 5v power. Power can be supplied with a 5v DC adapter via CN20
screw terminal or CN18 barrel connector, or via USB by connecting CN11 mini USB port to a standard
COM port of the PC.
2. To program the board:
i.
connect CN11 mini USB port to a PC,
ii.
configure the tool chain to use ST-LINK JTAG, and
iii.
connect appropriate jumpers from ST-LINK to programming target (main MCU or WMI module).
3. Use the provided demo applications for test and development.
4. Connect any additional project accessories (LCD, camera, wireless modules, USB or Ethernet cables)
5. Download and run the software applications using the preferred tool-chain.
