Clare Controls HDBaseT CM-BT20-TXRX100, User Manual

Page: 14 / 20

6 HDBaseT Extender Set 100m User Guide
Connection procedure
To connect the HDBaseT Compact Extender Set 100m:
1. Connect HDMI from the source (such as Blu-ray player) to the HDMI IN port of the
transmitter using an HDMI cable.
2. Connect the HDBT OUT port of the HDBaseT CM-BT20-TX100 to the HDBT IN
port of the receiver with a single CAT5e/CAT6 cable using TIA/EIA T568B
terminations at each end.
3. Connect the HDMI OUT port of the HDBaseT CM-BT20-RX100 to an HDMI in port
on the display using an HDMI cable.
4. When using the bi-directional IR control, do the following.
a. Connect the IR emitter at either end to the IR TX port on the
HDBaseT CM-BT20-TX100 or RX100.
b. When using a powered IR receiver, connect via a 3.5mm stereo plug to the
IR RX on either the HDBaseT CM-BT20-TX100 or RX100.
5. Connect one of the four available Ethernet ports to the internet, and then the other
ports can be connected to computers to establish a LAN.
6. Connect the RS232 port of the computer and the RS232 port on either the
CM-BT20-TX100 or RX100 using an RS232 cable.
7. Connect the 24VDC power adapter to the power port on the
HDBaseT CM-BT20-TX100 transmitter. The HDBaseT CM-BT20-RX100 receiver
is powered through PoC.
Application
The HDBaseT CM-BT20-TXRX100 extender pair is useful in any scenario when an
HDMI signal (along with control signals) must be transmitted reliably across greater
distances than is practical using traditional HDMI cables. They may be used in both
residential and commercial applications when centrally locating the source equipment
and displaying HD video in remote locations.