Clare Controls CV-P5D10-ODHIM, Installation Manual, Page: 40 / 52

36
Setting the network camera over
LAN
To view and configure the camera via LAN (Local Area
Network), you will need to connect the network camera in the
same subnet with your PC. Then, install the software to search
and change the IP of network camera.
The following figure shows the cable connection of network
camera and PC.
Figure 4: Wiring over LAN
To set the IP address of the camera for accessing via LAN:
1. To get the IP address, use the SADP tool. It can
automatically detect the network camera in the LAN. It
can also list the device information like IP address, subnet
mask, port number, device serial number, and device
version.
2. Change the IP address and subnet mask to the same
subnet as of your PC.
After launching the SADP software, it automatically
searches the online devices every 15 seconds from the