10
Figure 2: Wiring over LAN
To set the IP address of the camera to access via LAN:
1.
To get the IP address, use the SADP software. It
automatically detects the network camera in the LAN. It
also displays the device’s information such as IP address,
subnet mask, port number, device serial number, and
device version. See the figure below.
2.
Change the IP address and subnet mask to match subnet
of your PC.
After launching the SADP software, it automatically
searches your computers subnet for online devices every
15 seconds from. It displays the total number and
information of the found devices in the Online Devices
interface. The interface displays the device type, IP
address, port number, and gateway.
