2 / 2
P/N 2013-06-287-01
To mount the Extender:
1. Place the Extender over the enclosure panel ensuring
the cutout for the Wi-Fi antenna is on the right side of
the panel. See Figure 2.
Figure 2: Mounting the Extender
2. Align the screw holes on the Extender with screw holes
on the top and bottom of the enclosure panel.
3. Insert two #8-32 (for Leviton) or two #6-32 (for Suttle)
screws through the two top screw holes and loosely
tighten them in the enclosure panel.
4. Place the cover over the Extender and align the keyhole
openings over the two exposed screws, and then slide
the cover down so that the screws fit into the keyhole
notches. See Figure 3.
Figure 3: Attaching the cover
5. Insert the two remaining screws (#8-32 or #6-32)
through the holes in the bottom of the cover and the
Extender, and then into the enclosure panel.
6. Tighten all four screws until they are firmly seated and
the cover is secured.
Specifications
Dimensions (W
×
H
×
D)
Model CH-EXT-28
Model CH-EXT-42
15.6
×
29.3
×
1.0 in.
(39.6
×
74.4
×
2.5 cm)
15.6
×
43.3
×
1.0 in.
(39.6
×
110.0
×
2.5 cm)
Material
White painted aluminum
Compatible enclosures
Leviton Series 280 Structured Media Enclosure
Leviton Series 480 Structured Media Enclosure
Suttle 28” SOHO Access Enclosure
Suttle 42” SOHO Access Enclosure
Contact information
Clare Controls, Inc.
7519 Pennsylvania Ave, Suite 104
Sarasota, FL 34243
Support: 941.404.1072
Fax: 941.870.9646
http://support.clarecontrols.com
www.clarecontrols.com
Z-Wave cutout
Wi-Fi cutout
