Page 3
3. Stand on the skirt of the shelter, grasp the roof
hub pull sewn onto the eyelet in the center of the roof
panel-which is all black. Pull upward on the loop until
the roof section pops up
(Photo 3).
NOTE: The roof hub gets deployed
FIRST on set-up and collapsed LAST on take-down.
Photo 3
SET-UP INSTRUCTIONS
2. Open the shelter so that the gray top is facing
upward. Lay the shelter as flat on the ice as you
can, making sure that the tent is not twisted or
overlapping any of the poles
(Photo 2)
. Do NOT
force the shelter while unfolding.
5.
Walk around the entire shelter and pull each loop
sewn onto the eyelet in the center of the wall until all
sides are popped out-5X, as this is a 5 sided shelter.
(Photo 5).
Photo 2
4. Grasp the loop sewn onto the eyelet in the center
of one of the walls and pull outward until the wall
pops out
(Photo 4).
Photo 4
Photo 5
