STEP 3 -
ATTACHING RAIL SYSTEM
A)
REMOVE THE EXISTING SCREWS, WASHERS AND NUTS FROM TOP SIDES OF TRAILER.
B)
PLACE THE
LOOSELY
ASSEMBLIED RAIL SYSTEM IN PLACE AND
LOOSELY
ASSEMBLY SIDE RAILS TO TRAILER USING 1-SCREWS (102009) 1-WASHERS (102035)
AND 1-NUTS (101899) CENTERED PER EACH SIDE IN SAME LOCATIONS AS
PREVIOUSLY REMOVED FASTENERS.
C)
CLEARLY MARK THE REMAINING HOLES LOCATIONS (2- PER EACH SIDE RAIL) ONTO
THE TRAILER USING A MARKER OR SOME SHARP PUNCH TOOL.
D)
REMOVE THE RAIL SYSTEM FROM TRAILER.
E)
DRILL 3/8 DIAMETER HOLES THRU THE TRAILER AT MARKED LOCATIONS
.
F)
PLACE RAIL ASSEMBLY BACK ON TRAILER AND FASTEN TO TRAILER USING 3-SCREWS
(102009), 3-WASHER (102035) AND 3-NUTS (101899) PER EACH SIDE.
LOOSELY ASSEMBLY ALL COMPONENTS IN THIS STEP.
STEP-3 (A-B)
REMOVE EXISTING FASTNERS
AND REPLACE AS SHOWN
STEP-3 (C)
MARK HERE FOR DRILLING
LOCATIONS
STEP-3 (C)
MARK HERE FOR DRILLING
LOCATIONS
