Humidex
4
Installation
Description
The HCS Wall Control is intended for the following models:
-
HCS-BS (included)
-
HCS-CS (included)
-
HCS-APT (optional)
-
HCS-APTHC (optional)
The LCD display on this unit has a built-in backlight to allow for better readability in darker locations.
This backlight turns on when any button on the control panel is pressed and turns off after no button
has been pressed on the unit for a period of 10 seconds.
Wiring and Attaching the Control
Once the exhaust unit has been mounted, the control needs to be installed and connected. It
is crucial that the control is placed in the proper location. The HCS control must be installed
on the main floor and as close to the source of the replenishment air as possible while trying
to stay away from exterior doors and windows.
After having selected the installation location, the provided wire must be run from the main
unit to the control location.
As soon as the wire has been run
through the home, the controller can be
connected. To do so, open the control
by unscrewing the bottom screw, align
the control at the chosen location (with
the wire coming in) and mount it to the
wall with the screws provided
