Step 1: Mounting the Supports
Choose desired height of your curtain rod. Once you
have confirmed the proper height, use a pencil to
mark the wall where the top of the rod is resting.
Center the curtain rod over the window opening, and
mark where the ends of each rod are positioned.
If you have a center bracket (included in curtain rods
72” and longer), mark the middle point between
these two spots as well. Measure 3’’ from each end
of the curtain rod and mark those spots. This is
where the brackets will be installed.
Place bracket level against wall at the marked
spots. Using a pencil, lightly draw circles where
you will insert bracket screws.
If needed, drill holes and insert dry-wall anchors.
Next, fasten the L brackets to the wall.
Place cradle brackets over L-brackets and
secure with screw “A”
Step 2: Attaching the Rod Connector
(for spliced curtain rods only)
Depending on your order, you may have received a rod connector.
A rod connector is the short piece of metal tubing placed inside each
end of the rods in a multi-segment system to join them together.
On the open end of one-rod segment, slide the connector
halfway inside, leaving the other half exposed.
Slide the second rod segment over the exposed end of the connector,
making sure there is no gap between the two segments.
DESIRED HEIGHT
CENTER ROD
3”
3”
OPTIONAL
MIDDLE
BRACKET
CRADLE BRACKET
L
BRACKET
SCREW A
SCREW B
ROD CONNECTOR
ROD CONNECTOR
