6
7
Part list vaild for both
installation types:
1. Mounting screw
2. Ribbon cable
3. Interconnection cable
4. Screw terminal
5. Cable relief
6. Cable lead-through,
small
Installation type A:
Electric power supply
from above:
Installation type B:
Electric power supply
from below:
5. Installation
Figure 2: Assembly of
transmission adapter
2
2. Remove the small cable lead-through (6) according to the installation type and insert the grommet.
3. Fix the transmission adapter with the mounting screw.
4. Plug the jack of the ribbon cable on the main-PCB.
5. Insert the interconnection cable through the small grommet and connect the strands as follows:
+
yellow
DA
green
CL
brown
–
white
Shld
shielding
6. Fix the cable with the tie (cable relief).
5. Installation
The remote control should be sticked on the wall with the included hook-and-loop tape or durable double sided
adhesive tape. To position the cable remote it is furnished with a plain surface area underside.
6. Installation site
➁
➁
➀
➀
➃
➃
➄
➄
➂
➂
➅
➅
Summary of Contents for German Pool FXK
