clage 3200-36450, Operating And Installation Instructions

Page: 30 / 314

30
EN
DEX Next S
Temperature display
The scale ring fills up as the temperature setting is increased. In addition, the target
temperature is displayed in °C in the middle of the display.
Temperature setting
The desired temperature can be selected via the two middle sensor keys within a range
of 20 °C to 60 °C. Tapping once changes the temperature by 1 °C, in the comfort range
between 35 and 43 °C by 0.5 °C. If the temperature is set below 20 °C, the symbol
appears in the temperature display and the appliance switches off the heating function.
User selection
Up to four user profiles can be created. Every user has the option to save his desired
temperatures for the different application in his profile. The user profiles can be select-
ed by tapping on the left sensor key and than tap the key under the profile picture (to
adapt profile, see Section “User”).
Applications
Preset applications can be selected here. Simply tap on the right sensor key to open the
selection. Tap on the sensor key under an application symbol to activate it.
The temperatures are set at the factory to the following values: hand wash = 35 °C,
shower = 38 °C, bath tub = 40 °C, hot water = 48 °C
To change the values select an application and set the new temperature. Than press
and hold the sensor key under your profile picture or under the application symbol for
two seconds.
Status display, top
Control lock active (PIN).
The inlet temperature exceeds the target value (appliance does not heat up).
Remote control is installed. The appliance can be controlled remotely.
Status display, bottom
Display area for functions which require confirmation from the user or which are of
great significance.
Maintenance: The appliance detected an error. Select “Info” in the Main menu
to get further informations.
2. How to use
Main screen
The e-paper display changes automatically to main screen approx. 60 seconds after
activation or operation.
Tab the sensor keys to select user profiles or applications or change the temperature.
Temperature display
Status display, bottom
Status display, top
Sensor keys
Applications
User
Menu button