![claber Tempo Select User Manual Download Page 5](http://html1.mh-extra.com/html/claber/tempo-select/tempo-select_user-manual_2611971005.webp)
Tempo Select
Tempo Select
Pag. 5
Rain sensor. The timer can be connected to a Rain Sensor, by wire or by radio. When the level of water in the Rain Sensor rises
above 5 mm, the watering program will be suspended automatically, then resumed once the rainwater in the cup has evapo-
rated.
Installation. Remove the protective jumper from the rain sensor contacts (no tools are needed). If the Rain Sensor is not going
to be used, the jumper must remain in place across the contacts.
Wired Rain Sensor. Fit the connector of the sensor lead. Check that the two-core cable enters the timer by way of the slot
provided in the rear of the housing.
RF Rain Sensor. Install the RF Rain Sensor Interface, routing the wire antenna through the relative clips.
For Tempo Select (cod.): 8486
For Tempo Select (cod.): 8486
User manual
User manual
1
1
2
2
3
3
1
1
2
2
OK!!!
cod. 90831
cod. 8480
cod. 90915