Tempo Hybrid
Tempo Hybrid
Page 1
INSTALLATION - Where to install the TEMPO HYBRID. Install the water timer outside, in a bright area, avoiding
any areas which are in shade or dark.
When choosing the installation position, observe the indications provided below.
INSTALLATION - How to install the TEMPO HYBRID. (1) The spout of the tap should have a 3/4" threaded male
connector, if not, use an adapter. Screw the screw collar of the 3/4” female fitting onto the tap. Warning: only
tighten the ring nut by hand and not with tools (ex. pliers). (2) Connect the watering line to the quick-click or
threaded connector using the appropriate fittings.
Tempo Hybrid (cod.): 8487
Tempo Hybrid (cod.): 8487
User manual
User manual
> 45°
< 45°
> 90°
< 90°
1
1
2
2
angle exceeding 45°
position RECOMMENDED
angle LESS than 45°
position
NOT RECOMMENDED
angle exceeding 90°
position RECOMMENDED
angle LESS than 90°
position
NOT RECOMMENDED
1
1
2
2
3/4”
- Do not install the water timer
inside valve boxes, below ground
level or indoors.
- Do not use the timer with chemi-
cals or liquids other than water.
- Do not use the water timer with
operating pressures lower than
0.2 bar (2,9 psi) or higher than 12
bar (174 psi).
