Claas LEXION 570 Montana, Operator'S Manual

Page: 33 / 41

0299 767.0 - BA LEXION 570 Montana
4.1.5
Safety Rules
Battery isolating switch
Isolating switch (H) cuts off the electrical power supply
to the whole machine.
E = ON (switch on by turning clockwise)
A = OFF (switch off by turning anti-clockwise)
Turn off the isolating switch in case of emergency
and when carrying out maintenance work.
ATTENTION!
Do not turn off the battery isolating switch
while the engine is running.
(Fig. 4)
Wheel chocks
(not for all countries)
The combine is equipped with two wheel chocks from
the factory. The brackets holding the wheel chocks
are located on the left-hand machine side behind the
fan guard. The wheel chocks must be carried on the
machine at all times.
When leaving the machine on uneven ground, both
wheel chocks must always be placed under the
traction wheels.
(Fig. 5)
Positioning the wheel chocks
Always position the wheel chocks in front of or behind
the traction wheels (depending on the slope of the
ground) on both sides of the machine.
Always position the wheel chocks so that the machine
cannot roll away.
Completely open the wheel chocks and place as close
to the traction wheels as possible.
(Fig. 6)
H
A
E
4
5
6