Claas DOMINATOR 68 S, Operator'S Manual

Page: 17 / 31

186 431.1 - BA DOMINATOR 68 S
3.2.1
General Information
IMPORTANT NOTE The instructions contained in this manual
should be carefully read and observed by all
persons who are concerned with the operation,
maintenance and inspection of this machine, in
order to prevent accidents. In particular read the
section »Safety Rules«.
The use of spare parts, accessories and
ancillary equipment which are not originally
manufactured by CLAAS and have not been
tested and approved by CLAAS can change
design characteristics of the CLAAS machine or
can detract from its functional performance,
with a possible adverse affect on the active and/
or passive operational safety of the machine
and its occupational safety standards (accident
prevention).
CLAAS are in no way liable for any damage or
personal injury caused as a result of the use of
other than original or approved CLAAS parts,
accessories and ancillary equipment.
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve the
right to make changes subsequently as
technical developments continue. No respon-
sibility is accepted for errors or omissions.
Front, rear, right and left always refer to the
direction of travel.
General Information