Check the axle stands are suitable for the load. For
information, refer to chapter K to check that the props and
the lifting device are suited to the load to be lifted.
-
To place the rear axle on axle stands, position the axle
stands under the rear axle tubes.
-
To place the front axle on axle stands, position the axle
stands under the front axle on either side of the
differential housing.
4-4-wheel drive tractor:
-
If the rear axle is on stands, do not start the engine
(Risk of the tractor moving if the brakes are activated
(foot brake or hand brake)).
-
If the rear axle is laid on props, and if the engine must
be started, the front axle must also be laid on props.
001hsn31
6.1.5.3
Electrical services
5753
Knowledge and skill are required to work on the electrical system. If required (installation of miscellaneous
accessories, radio accessories, etc.), call your CLAAS approved workshop .
Moreover:
-
Always disconnect the battery negative terminal before
working on the electrical system.
-
Never replace a defective fuse with a larger calibre fuse.
Risk of fire.
-
Never intervene on elements such as the alternator or
fan when the engine is running.
-
Comply with safety instructions when welding (See
chapter L).
001hsn32
-
Avoid generating sparks or open flames next to the battery.
-
Handle the battery with great care because it contains sulphuric acid that must not come into contact with the
eyes or skin. Wear gloves and goggles. In case of projection of acid on your skin or in your eyes, thoroughly
rinse with water immediately, and call a doctor.
Use a torch to check the level of electrolyte.
Do not check the battery's charge by placing a metallic object between the terminals. Use a voltmeter or
acidimeter.
6.1.5.4
Fuel
6574
-
Always switch off the engine before refuelling.
-
Do not smoke while refuelling and stay away from any flame or source of sparks.
-
Before filling the fuel tank, check that no cell phone is nearby.
A. 12
AXION 850-810 C.I.S. - 02/2012 - en
Summary of Contents for AXION 810 C.I.S.
