SM-P00077-A/3
2. INSTALLATION
40
2020-04-15
2.5
Wiring
WARNING
Turn off the power before wiring.
An electric shock may occur.
Do not touch live parts with bare hands.
An electric shock may occur.
Thoroughly read and understand this Instruction Manual before working on electrical wiring.
The product must be handled by a person who understands the structure and operation principle
of solenoid valve and has knowledge to secure the safety.
CAUTION
Check the power supply voltage and the type of current (AC or DC) before supplying power.
Do not apply stress to the lead wires.
Undue stress may cause such problems as disconnection of the lead wires or the contact
terminals.
Make sure that the voltage drop on the solenoid does not exceed 10% of the rated voltage.
Voltage drop occurs when energizing solenoids at the same time or depending on the cable length.
Connect the product to the output unit.
Connecting the product to the input unit may cause failures not only in the product but also in
peripheral devices. Do not connect the product to the input unit.
