704
If the pilot solenoid valve has been disassembled, assemble it as follows.
䡵
Assembling pilot solenoid valve
(for solenoid valve mounted type)
䡵
Gasket direction (for solenoid valve mounted type)
The gasket has an orientation. Check the orientation when reassembling.
䡵
Model no. of pilot solenoid valve (actuator assembly kit)
for CVSE
CVSE2-ACTUATOR–0
Rated voltage
–
Note 1: Indicate the coil option symbol in field *1.
Note 2: Consult with your CKD Sales Representative about the
solenoid valve (actuator assembly kit) for CVS3E.
*1
(1) Coil side
· Disassembling
Loosen the cross headed pan head machine screw, and lift up the
coil assembly.
The outer spring, plunger assembly and O ring can be removed.
· Reassembling
Set the parts in the sequence of the O ring, plunger assembly, outer
spring and coil assembly.
Tighten the cross headed pan head machine screw with a torque of
0.7 to 1.1 N·m.
(2) Cover side
· Disassembling
Loosen the flat headed cross cut screw, and remove the cover.
The valving element spring, valving element guide assembly and O
ring can be removed.
· Reassembling
Set the parts in the sequence of the O ring, valving element guide
assembly, valving element spring and cover. Tighten the flat headed
cross cut screw with a torque of 0.7 to 1.1 N·m.
Note 1: Do not lose the components such as springs during disassembly.
Note 2: The coil assembly direction can be changed 180˚. Loosen the
cross headed pan head machine screw to change the direction.
Note 3: Turbine oil is applied to the plunger as a lubricant.
Cross headed pan head
machine screw
Body assembly
Flat headed cross
cut screw
Valving element
guide assembly
Valving element
spring
Cover
O ring
O ring
Plunger assembly
Coil assembly
Outer spring
Note 2
CVSE22/CVSE3
CVSE2
NO (normally open) type, 3 port valve
NC (normally closed) type
Port R
Port R
Gasket
CVE/CVSE
Series
@
