[SM-215163-A/2]
―
1
―
SAFETY PRECAUTIONS
When designing and manufacturing a device using CKD products, the manufacturer is obli-
gated to manufacture a safe product by confirming safety of the system comprising the
following items:
・
Device mechanism
・
Pneumatic or water control circuit
・
Electric control that controls the above
It is important to select, use, handle, and maintain the product appropriately to ensure that
the CKD product is used safely.
Observe warnings and precautions to ensure device safety.
Check that device safety is ensured, and manufacture a safe device.
１．
This product is designed and manufactured as a general industrial machine part. It must
be handled by someone having sufficient knowledge and experience.
２．
Use this product within its specifications.
This product cannot be used beyond its specifications. Additionally, the product must not be
modified or machined.
This product is intended for use in general industrial devices and parts. Use beyond such conditions
is not considered. Consult with CKD for details when using the product beyond the unique
specification range, outdoors, or in the following conditions or environments. In any case, measures
for safety shall be provided when the vavle malfunctions.
①
Use for special applications requiring safety including nuclear energy, railroad, aviation, ship, vehicle,
medical equipment, equipment or applications coming into contact with beverage or food,
amusement equipment, emergency shutoff circuits, press machine, brake circuits, or for safeguard.
②
Use for applications where life or assets could be adversely affected, and special safety measures
are required.
３．
Observe corporate standards and regulations, etc., related to the safety of device design
and control, etc.
ISO4414, JIS B 8370 (pneumatic system rules)
JFPS2008 (principles for pneumatic cylinder selection and use)
Including High Pressure Gas Maintenance Law, Occupational Safety and Sanitation Laws, other
safety rules, standards and regulations, etc.
４．
Do not handle, pipe, or remove devices before confirming safety.
①
Inspect and service the machine and devices after confirming safety of the entire system related to
this product.
②
Note that there may be hot or charged sections even after operation is stopped.
③
When inspecting or servicing the device, turn off the energy source (air supply or water supply), and
turn off power to the facility. Release any compressed air from the system, and pay enough
attention to possible water leakage and leakage of electricity.
④
When starting or restarting a machine or device that incorporates pneumatic components, make
sure that system safety, such as pop-out prevention measures, is secured.
WARNING
