CK CK420, User Manual, Page: 7 / 11

Menu Menu Menu Menu Discerption Discerption Discerption Discerption
1
．
A001 display the products’ DMX address
001 for setting the products’ DMX address cord
This function is used to set or adjust the fixture’s starting DMX address. Every
device controlled by DMX has to have a unique starting address.
The addressing feature is what allows DMX to function properly. The DMX
address of a fixture is what allows it to communicate with a controller properly.
2. Rpan
：
Rotation Pan
This function allows you to invert all pan movements. Use the Up and Down
buttons to turn this function On or Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu.
3. Rtil
：
Rotation Tilt
Tilt Reverse - This function allows you to invert all tilt movements. Use the Up
and Down buttons to turn this function On or Off. Press the Enter button to
accept the change or the Mode button to cancel and return to the main menu.
4. Mode: DMX Control mode, Auto mode, Sound Mode
This function allows you to choose different work mode. By DMX Control Mode,
you can control via DMX512 Controller, by Auto Mode the lights can auto run
by self, by Sound Mode the light can control by music
5. Disp
：
3 Modes:
MODE1:Normal display
MODE2:Half bright
MODE3:Close (return by any key)
This function allows you to choose different display mode.
6. Lamp: Control the lamp on / off . This function allows manual control of the
lamp power via the on-board system menu.
“ON” mode ,click the button ,until appear “OK”,and click again ,setting to :lamp
on when turn on the light .
“OFF” mode,click the button ,until appear “OK”,and click again,setting to:”lamp
off when turn on the light.
7. Rset
：
Reset and enter, after 3 seconds, it will be reset.
The reset function returns a motor to the “Home” position. The light will be
restart.
8. urn
：
Show 180 degree rotation
This function allows the light show 180 degree rotation.