PREFABRICATED FFLUE BBOXES ((continued)
Some flue boxes may require minor adaption when fitting the fire using the cable fixing kit.
The firebox, base of the flue box, and the hearth may be drilled to allow plugs and screws to secure installation.
It is important that the sealing requirements of the appliance are met at all times and that the flue box is well
sealed to any back or infill panel.
Note: TThe D
DEPTH ddimenssionss sshown aare iincclussive oof aany bbacck oor iinfill ppanelss.
UNPACKING TTHE A
APPLIANCE
Stand the carton right way up, cut the strapping bands and remove the top end cap. Read all the instructions
before continuing to unpack or install this appliance.
Remove the boxes containing the firefront and the ceramics. Remove the cardboard packing pieces, and any bags
containing other fittings or parts.
When all loose parts have been removed, the outer sleeve may be lifted off to reveal the appliance.
Check that the components supplied correlate with the checklist given in section 7.1.
Please dispose of the packaging materials at your local recycling centre.
COMPONENT C
CHECKLIST
QUA
ANTITY
DESCRIPTION
1
Firebox and burner tray assembly.
1
Decorative frame, one of several finishes.
1
Firefront with separate ashpan cover, one of several designs and finishes.
1
Moulded ceramic fibre combustion matrix.
16
Individual ceramic coals (coal effect option only)
16
Individual ceramic pebbles (pebble effect option only)
1
Moulded ceramic front coal (coal effect option only)
1
Moulded ceramic front pebble strip (pebble effect option only)
1
Set of manufacturers instructions.
1
Cable fixing kit comprising; 2 cables, 2 tensioners, 2 clamps, 4 fixing eyes, 4 fibre rawl plugs.
1
Self tapping screw pack
3
Lengths of self adhesive sealing strip.
1
Rubber grommet.
PREPARING TTHE A
APPLIANCE
Note: EEnssure tthat tthe ggass ssupply iiss iissolated bbefore ccommenccingg iinsstallation oof tthe aappliancce.
The fireplace opening and environment must be in compliance with
the specifications laid down in the appropriate sections of these
instructions.
Remove the appliance from it’s carton as described previously and
stand upon a dust sheet or similar. Place the decorative frame, coals,
ceramics and fixings safely to one side. Remove the burner from the
assembly by releasing the two screws through the tray legs. The tray
is now free, and may be lifted away. Apply the self adhesive sealing
strips to the back of the fireframe to give a continuous seal.
5
6.0
7.0
8.0
7.1
