CityCom CCA 600 Series, Manual, Page: 11 / 20

CityCom
R
Ein Unternehmen der Kathrein-Firmengruppe
11 / 20
■
Re
fl
ector made of aluminium, powder coated
■
Rear panel made of pre-galvanised steel
■
LNB support arm of aluminium
■
Mast clamps and threaded clamps of galvanised steel
(completely pre-mounted)
■
Screws and nuts of stainless steel or with a corrosion-
resistant coating
■
Available in grey, white or red
■
Delivery scope: re
fl
ector with pre-mounted mast and feed
system supports
Features
■
To mount two LNBs (multi-feed reception) on the boom
(only possible for CCA 750/850) to receive the signals of
satellites up to 10° apart (e.g. ASTRA/EUTELSAT HOTBIRD),
the CCZ 02 multi-feed support (Order no. 20010044) is
additionally required (see below).
Proper use (use for the intended purpose)
The parabolic antennas are
intended solely for the reception of satellite signals
and for
use only as domestic antennas
.
DIN 4131 speci
fi
es that a domestic antenna should have no more than 6 m free mast length and a
fi
xed-end moment up to 1650 Nm.
It is unsuitable for mounting on structures that are liable to vibration.
Make absolutely sure that the values for the maximum load listed in the Technical Data (on the last page) are complied with. If this
load is exceeded, parts could break away!
The parabolic atennas are designed for use with a feed system (LNB) for reception of the signals from one satellite position, or two feed
systems for multi-feed applications (CCA 750/850 with CCZ 02) for reception of the signals from two satellite positions up to 10°apart.
The feed systems and instructions for their installation are not included in the scope of supply of the parabolic antenna.
Optionally available accessories
■
Multi-feed support CCZ 02, Order no. 20010044
Multi-feed support suitable for CCA 750/850.
To determine the elevation values for your location,
consult the azimuth/elevation calculation table on
the following Internet website:
http://www.kathrein.de
Offset parabolic
antennas
CCA 600/x
CCA 750/x
CCA 850/x
Do not use the parabolic antenna for purposes other than those listed in this manual! Any use other than that speci
fi
ed
above will invalidate the warranty or guarantee.
In particular,
never
•
modify
any of its
components
or
•
fi t any components other
than those expressly intended by the manufacturer for use with the antenna.
Breach of these rules may lead to the antenna no longer being suffi ciently stable and safe!
The laws and standards currently valid for the installation and operation of the antenna are binding and are to be
observed an applied without fail!