CityBlitz CB050SZ, Original Instructions Manual, Page: 38 / 44

EN
37
2. When the scooter is switched on, double-click quickly to shift gears
(2 gears in total).
Attach the license plate bracket on the right side of the rear wheel with the Phillips
screwdriver and the Phillips screwdriver clockwise.
3. Fold the kickstand.
4. Put one foot on the footplate and the second foot on the floor,accelerate by 2-3
strong kicks the scooter (scooter can not speed up the stand) and press gently
on the accelerator, to start driving. Once you have enough balance, it is safer to
second foot also on the foot plate. The stronger you are on the
Press accelerator, the higher the speed.
5. Release the accelerator and gently press the electric brake to stop the
product. Gradually get down, putting one foot down at a time.
6. Turn off the product when the ride is over by holding and pressing the on/off
button for about 2 seconds.
This product is equipped with an electric brake on the front wheel and a
disc brake on the rear wheel. Always use both brakes to stop.
0 - 7 km/h 1
7 - 11 km/h 2
11 - 20 km/h 3