5916 QolorFLEX 2x2.5A 2.4GHz Multiverse Dimmer
3
2 Compliance
This device complies with Part 15 of the Federal Communications Commission (FCC)
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
CAUTION:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
2.1 IC Statement
This device
complies with Industry Canada’s license-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
2.2 CE Mark Conformity
City Theatrical Inc. declares that this product conforms to the specifications listed in this
manual, following the provisions of the European RED Directive 2014/53/EU.
City Theatrical Inc. vakuuttaa täten että dieses produkt tyyppinen laite on direktiivin
2014/53/EU oleellisten vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen
mukainen.
City Theatrical Inc. déclare que le produit est conforme aux conditions essentielles et aux
dispositions relatives à la RED directive 2014/53/EU.
• EN 301 489-1, 301 489-18 General EMC requirements for Radio equipment.
• EN 62832 Safety
• EN 300 328 Technical requirements for Radio equipment.
CAUTION
—This equipment is intended to be used in all EU and EFTA countries. Outdoor
use may be restricted to certain frequencies and/or may require a license for operation.
Contact local Authority for procedure to follow.
Note:
ESD precautions should be used when attaching or removing the antenna.
Note:
Combinations of power levels and antennas resulting in a radiated power level of
above 100 mW equivalent isotropic radiated power (EIRP) are considered as not compliant
