background image

 

Page 4 of 8 

 

Introduction 

The 5940 Multiverse® Studio Add On Kit 900MHz/2.4GHz brings the advanced technology of 
the dual band Multiverse wireless DMX/RDM system to the film and video world, featuring 
Receivers with 20 hour battery life and contactless charging in an easy to use kit.  
 
Just drop the Multiverse Studio Receiver onto its slot in the case, and it will begin charging.   
Individual chargers and USB cables are also included to enable charging or powering 
individual units outside the case. 
 
The 5940 Multiverse Studio Add On Kit provides six additional Multiverse Studio Receivers 
for users to expand upon their full 5938 Multiverse Studio Kits. 
 

Getting Started 

The USB flash drive included with each kit contains the user manual for each product in the kit, 
software downloads, and other useful information.  
 
Here are basic steps in setting up a system: 
 

1.  Use the RadioScan Spectrum Analyzer to view the radio activity in the spectrum around 

you, and choose the area of the spectrum in which you want to broadcast.   Use the 
Multiverse SHoW IDs tab on RadioScan to help choose a SHoW ID. 

 
2.  Enter the SHoW ID you chose into the Multiverse Transmitter or Multiverse Node you are 

using, and into each Multiverse Studio Receiver. 

 

3.  Enter the universe you are broadcasting, and an optional SHoW Key into the Multiverse 

Transmitter or Multiverse Node you are using, and into each Multiverse Studio Receiver. 

 

Note:  SHoW ID, Universe, and SHoW Key (if used) must match on transmitter and all 
receivers. 
 

For additional information, consult the product manuals of the individual products.  They can be 
found on the USB flash drive in the 5938 Multiverse Studio Kit, or on the City Theatrical website 
on each individual product page.  

 
Charging in The Charging Case 

Multiverse Studio Add On Kit 900MHz/2.4GHz utilizes a contactless charging system.  Individual 
chargers and USB cables are also included to enable charging individual units outside the 
case. 
 
Multiverse Studio Receivers have a run time of 20 hours using the default settings.  The 
setting which most influences run time is the backlight brightness.  The default setting is 70%, 
and run time can be extended by decreasing backlight brightness, or by setting a backlight 
timeout period which will turn the backlight off after a time period you set.  Touching any key 
will turn the backlight on again for the period you chose.  Setting the backlight to 100% will 
reduce run time to approximately 16 hours. 
 

Always charge with the lid of the case open for ventilation.  

Charge time from fully 

discharged to fully charged is 3.5 hours.   
 
Charging may be done with Multiverse Studio Receivers either turned on or off.   
 

Summary of Contents for Multiverse 5940









Reviews: