Page 9 of 12
RDM Settings
The Multiverse Studio Receiver can be configured remotely with a compatible RDM controller,
such as DMXcat®. All of the settings available through the menu can be set via RDM. Aside from
settings, you can also view the Device Model, Manufacturer, Firmware Versions, RDM UID, RF
Signal Quality, RF Signal Strength, and Battery Charge %. You can also give each device a
unique RDM Device Label to help with identification for configuration and troubleshooting.
Updating Firmware
Firmware updates and instructions for performing them are available on the product pages of the
City Theatrical website.
Table 3: Troubleshooting Guide
Specifications
Table 4: Physical Characteristics
(Continued)
Symptom
Solution(s)
Unit does not power up.
Check that battery has sufficient charge
Check that power cable is properly installed using external
power
Fixtures connected to the
receiver are not responding.
Check that the Tx symbol on transmitters is solid, and that DMX
symbol is shown on Multiverse Studio Receiver.
Check that SHoW ID, Universe, and SHoW Key (if used) match
on all transmitters and receivers.
Product Information
Product Name
Multiverse Studio Receiver (900MHz/2.4GHz)
Part Number
5904
Maximum Concurrent Universes 1
Frequency Range:
2400
– 2480 MHz
902
– 928 MHz
Physical Specifications
Length
95.25mm (3.75 in)
Length with antenna
139.7mm (5.5 in)
Width
46.0mm (1.812 in)
Height
25.4mm (1.0 in)
Antenna
Dual band 900MHz / 2.4GHz 1.8dBi / 3.8dBi
User Interface
4 Button/Backlit LCD display
Construction
ABS plastic
Electrical
Power
Internal battery; included external power supply 100-240VAC
input, 5VDC output USB-A
Battery
Internal lithium-ion polymer, 20-hour life on default operating
settings
Charge time
- Contactless charger: 3.5 hours
- USB-C: 2.5 hours
