Page
5 of 7
able using the entry provided. An RJ45 Ethernet Plug must be installed on the Ethernet
is pulled into the box, using the standard TIA-EIA T568B pin out.
ght provided 6- 32 x .375” SS Truss Head Machine Screws. Hand install these screws until
Ethernet Cable entry
The unit is provided with an RJ45 Ethernet Jack for Ethernet connection. Install the Ethernet
c
cable after the cable
Installing the Cover
The 7400-5707 SHoW DMX Vero Net Transceiver has a two part cover, with the outer plastic
cover connected to the inner metal cover with a hinge. Install the metal inner cover using the
ei
the screw threads are fully engaged with the mating PEM Nut, then tighten to 4 inch pounds.
The outer cover is then closed and secured with the provided 8-18 x .500” SS Thread Forming
orx Button Head Security Screw, installed in the provided hole on the left side of the cover
ou can configure the Vero Net Transceiver’s basic operating settings using the System
in the detail above.
T
assembly.
THE 7400-5708 SHOW DMX VERO NET TRANSCEIVER SETTINGS
Configuration
Y
Settings switches shown
