Page 3
SYSTEM COMPLIANCE INFORMATION
The 5620 Dimmer is ETL and cETL Listed as follows:
ETL Listed, Conforms to UL 508A
cETL Listed, Certified to Can/CSA Standard 22.2 14-95
The 5620 Dimmer is CE Certified
Standards Applied:
BS EN 60950-1:2002 incorporating Corrigendum No. 1 and Amendment No. 1
EN 55203-1: 1996
EN 55203-2: 1996
Product Conforms to CE Marking Directive 93/68/EEC
All SHoW DMX models are RoHS compliant
Safety Notices
Please read this entire manual before using your new equipment. Please keep the
manual in a safe place so you can refer to it in the future as required.
The SHoW DMX System is intended for use only by qualified professionals. Connection,
installation and hanging of this equipment must be performed in accordance with all
pertinent local, regional and national safety codes and regulations.
SHoW DMX equipment is intended for indoor use only unless specified for outdoor use.
Keep the equipment dry! Do not operate the equipment if it gets wet!
Do not operate in excessive heat/direct sunlight.
Be sure installation provides adequate ventilation. Some system components can
produce significant heat and must be properly installed to allow proper cooling and
assure user safety (please see specific notes about 5620 Dimmer installation and heat in
this manual). All sides of the equipment must be clear of obstruction and allow free
airflow.