City Theatrical Inc. 4160 Projector Dowser Userʼs Manual
5
Dry Closure Operation
The 4160 Projector Dowser is also provided with a Dry Closure control input which will allow
basic operation or manual checkout without using DMX. When the Dry Closure terminals are
open and no DMX Control is present, the unit will remain at the home position. When the Dry
Closure terminals are connected to each other (you can use a paper clip or short length of wire)
the unit will move to the FULL position, 90° counter-clockwise from home position.
This feature also works in conjunction with DMX
control. If DMX is present, the Dry Closure
interface will function and over-ride the DMX
command. If the Dry Closure terminals are
connected, the unit will move to the FULL position,
90° counter-clockwise from home position. When
the Dry Closure is released the unit will return to
DMX control and the DMX selected position.
When access to a DMX controller is not
convenient, the Dry Closure input can be used to
check the flag calibration or to troubleshoot the
system, much the way a bump button is used on a
dimmer.
Power:
24VDC, 250mA
Weight:
3.0 lbs
Dimensions:
Accessories:
All accessories are sold separately.
CTI # 4160-006 Dowser Flag
CTI # 4160-010 1/16” Hex Wrench
CTI # 4160-007 Flag Hub
CTI # 4160-011 Rubber Feet Kit
CTI # 4160-008 Accessory Plate
CTI # 4160-012 Velcro Kit
CTI # 2199 Power Supply
