LG BASIC
Operating and Changing Instructions
CITYSAFES FACTORY DEFAULT CODE IS
123456
TO OPEN
1. Enter valid six (6) digit code. If opening for the first time, factory
default code is 123456. Each number is accompanied by a BEEP.
2. 2 BEEPS at the end of code entry indicates code is accepted.
Turn safe handle to open safe.
3. 3 BEEPS at the end of code entry indicates wrong code has been
entered. Check code and re-enter.
TO LOCK
1. Close safe door and turn handle to close position. The lock will
lock automatically.
TO CHANGE CODE
Always perform operation with door open.
1. En
ter “Zero” six times.
2. Enter your existing six (6) digit code once. If on factory setting
enter 123456.
3. Enter your NEW six (6) digit code twice (eg:
473265
473265)
4. 2 BEEPS indicates code is accepted.
5. Test new code several times before closing the door.
6. VALID CODE ENTRY - 2 BEEPS at the end of code entry
indicates code is accepted.
7.
INVALID CODE ENTRY - 3 BEEPS at the end of code entry
indicates wrong code has been entered. Old code is still valid.
WRONG TRY PENALTY
Entry of four (4) consecutive invalid codes starts a 5 minute delay
period in which the lock is inoperable.
A red light flashing intermittently on the input pad indicates this.
At the end of the delay period, the lock is ready for the correct code
entry.
An additional invalid code will start the 5 minute delay period again.
