
E-scooter CITY BOSS T7 / V5 / V4
ENGLISH
52
SAFETY INSTRUCTIONS
1. This device is designed for single use. Do not allow children under 16 to use the scooter. Do
not carry any passenger.
2. Always wear safety equipment such as a helmet and shoes.
3. Practice in open space and get familiar with the control method before riding.
4. Do not do stunts or ride the scooter only by single hand. Keep the feet on the device.
5. Do not ride the device on oil or ice.
6. Do not use the device under -
5°C.
7. Do not sink the device into the water depth of 3 cm or deeper. It would cause a short-circuit,
fault of the motor or electronic parts.
8. If you do not use the device for longer time, charge the battery to around 60% capacity.
9. Do not use e-scooter on public roads.
10. Before using e-scooter, make sure that you do not violate local laws and regulations by
operating it. If you are not sure, contact your local authorities.
11. Check all parts are secured and the bolts are tightened before every ride.
12. Do not make unauthorized modifications or unauthorized maintenance to reduce the safety
of your device.
13. Regularly check the wear and tear of the product. Replace worn parts immediately.
14. Keep the instructions in the User manual for maintenance and use. Do not disassemble the
device yourself.
15. Check the battery status before each trip. If it is low charged, do not start the trip.
16. The device is for personal use only. Commercial use is not allowed.
17. When riding on uneven surface, keep your legs relaxed and your knees slightly bent.
18. Other activities (making calls, listening to music) can significantly reduce your driving
attention.
19. Do not exceed max. weight.
BEFORE THE FIRST TRIP
Before the first trip, check / adjust:
Front light
The front light is not factory mounted to a scooter for transport safety reasons. Screw it to the
frame, set it to the correct position, and tighten the fixing bolt.
Brake levers
Position the brake levers to be convenient for holding and tighten the brake clamp.
Display
Loosen the fixing bolts of the display clamp and rotate the display so that it is clearly visible and
the throttle lever is handy. Then tighten the fixing bolts again. Remove the protective film from
the display.
E-scooter CITY BOSS T7 / V5 / V4
ENGLISH
52
SAFETY INSTRUCTIONS
1. This device is designed for single use. Do not allow children under 16 to use the scooter. Do
not carry any passenger.
2. Always wear safety equipment such as a helmet and shoes.
3. Practice in open space and get familiar with the control method before riding.
4. Do not do stunts or ride the scooter only by single hand. Keep the feet on the device.
5. Do not ride the device on oil or ice.
6. Do not use the device under -
5°C.
7. Do not sink the device into the water depth of 3 cm or deeper. It would cause a short-circuit,
fault of the motor or electronic parts.
8. If you do not use the device for longer time, charge the battery to around 60% capacity.
9. Do not use e-scooter on public roads.
10. Before using e-scooter, make sure that you do not violate local laws and regulations by
operating it. If you are not sure, contact your local authorities.
11. Check all parts are secured and the bolts are tightened before every ride.
12. Do not make unauthorized modifications or unauthorized maintenance to reduce the safety
of your device.
13. Regularly check the wear and tear of the product. Replace worn parts immediately.
14. Keep the instructions in the User manual for maintenance and use. Do not disassemble the
device yourself.
15. Check the battery status before each trip. If it is low charged, do not start the trip.
16. The device is for personal use only. Commercial use is not allowed.
17. When riding on uneven surface, keep your legs relaxed and your knees slightly bent.
18. Other activities (making calls, listening to music) can significantly reduce your driving
attention.
19. Do not exceed max. weight.
BEFORE THE FIRST TRIP
Before the first trip, check / adjust:
Front light
The front light is not factory mounted to a scooter for transport safety reasons. Screw it to the
frame, set it to the correct position, and tighten the fixing bolt.
Brake levers
Position the brake levers to be convenient for holding and tighten the brake clamp.
Display
Loosen the fixing bolts of the display clamp and rotate the display so that it is clearly visible and
the throttle lever is handy. Then tighten the fixing bolts again. Remove the protective film from
the display.
Summary of Contents for T7
Page 1: ......