Introduction:
Thank you for choosing the Citronic 16 channel UHF-series wireless system. This professional wireless set provides a high quality microphone with a
tuneable PLL UHF radio system for ultimate wireless quality and versatility. Please read this manual before using this equipment in order to avoid damage
through incorrect operation and to get the best performance from your purchase.
Contents:
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components…
UHF wireless receiver
Mains power adapter
6.3mm mono jack lead
2 x 1.5V AA battery (4 pieces for MU26H and MU26N)
Rack-mounting adapters
Microphone / transmitter(s)
– see table below
Model
Stock code
Microphone 1
Microphone 2
MU16H
171.829
Handheld transmitter
-
MU26H
171.832
Handheld transmitter
Handheld transmitter
MU16N
171.830
Discreet neckband mic. + bodypack
-
MU26N
171.833
Discreet neckband mic. + bodypack
Discreet neckband mic. + bodypack
Warning:
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by qualified personnel before further use.
Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule failure.
No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.
Safety
Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the adapter.
Avoid ingress of water or particles into the transmitter(s) or receiver
Use alkaline or NiMH batteries in the transmitter(s) and remove if unused for long periods.
Observe the correct polarity when replacing batteries
Placement
Keep all components out of direct sunlight and away from heat sources.
Do not place heavy objects on top of the receiver or transmitter(s)
If rack-mounting receivers in pairs, use the supplied rack ears and coupling brackets.
If rack-mounting individually, secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver.
Keep the transmitter(s) and receiver away from damp or dusty environments.
Cleaning
Use a soft cloth with a neutral detergent to clean the body of the microphone/transmitter and receiver.
Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes
To avoid damage, do not use solvents to clean the components
Handheld Transmitter
Beltpack Transmitter
1. Windshield
2. Backlit LCD display
3. Slide switch
– OFF/MUTE/ON
4. Battery compartment cover
1.
UHF antenna
2.
LED indicator
3.
Sensitivity switch LINE-MIC
4.
MIC input, threaded 3.5mm jack
5.
Backlit LCD display
6.
ON/check button
7.
GAIN ADJUST rotary
8.
Battery compartment
