background image

Citronic Limited CD-S2 Owners Manual

Page 7 of 8

27. Voltage Selector

Used to select the unit’s voltage according to the
local setting. Note: The voltage should be preset
correctly from the factory, however, make sure
before powering the unit.

28. AC In

This is the connection for the supplied power cable.

29. Power

This switch is used to power the unit on and off.

Technical Information

Power Source:

AC 115/230V. 50/60Hz, 15W

Dimensions:

274 (D) x 216 (W), 87 (H) mm

Weight:

1.6kgs

Guarantee Of Satisfaction

CE Markings

This product is guaranteed to the original purchaser against defects in material and workmanship for one year from
the date of initial purchase.  Activate this guarantee at the time of purchase by returning the Guarantee Card to the
address on the front page.  Keep a copy of your sales receipt for proof of guarantee status, should it be necessary.
       If a malfunction occurs, the dealer who supplied the unit will be happy to handle the repair.  When returning a
unit, use the original factory carton – do not chance inadequate packing materials.  Simply tape a note to the unit
describing the malfunction.
       If your unit is out of guarantee, we recommend that you return it to an authorised Citronic dealer for repair or
service.  Experienced personnel, supported by specialist testing equipment, will be able to find and correct the fault
in the most efficient and cost effective way
If you have need to contact us about the operation or servicing of your CD-S2 Top Loading Single CD Player
please write, telephone or e-mail to the address on the back page:-

EMC Conformity

The CD-S2 Top Loading Single CD Player has been tested to demonstrate compliance with the EMC 89/336/EEC
directive, under which the following harmonised standards apply:
       I) EN55013

Electromagnetic Compatibility

II) EN61000-3-2

EME-010700

III) EN61000-3-3 EME-010700

      

Electrical Equipment Safety Regulations (1994)

The CD-S2 Top Loading Single CD Player has been designed and tested to demonstrate compliance the LVD
73/23/Eec directive, using the following standard.

I) EN60065 Safety requirements for mains operated electronic equipment for household and similar general

use.

Reviews: