Citronic cd-1x, Owner'S Manual

Page: 7 / 10

™
Installation Notes
The control unit and player have rack-fixing holes on the front panel to enable them to be easily fitted into a suitable case.
Mounting
The player will work normally when the main unit is mounted with the front panel at within 15 degrees of the vertical plane. If
the unit is tilted excessively, discs may not be loaded or unloaded properly.
The control panel's LCD's are designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so
that the visual angle is within this range.
Connections
1. Turn off the POWER switch.
2. Connect the RCA phone jack (phono) cable to the input on your mixer.
3. Connect the control cords to the REMOTE connector on the main unit.
4. Connect the CDG output RCA phono to the video input of your screen
CAUTION:
•
Be sure to use the supplied control cords. Using another type of cable may result in damage.
Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.
Typical Set-up