background image

 

®

 

 

Introduction  

Congratulations on your Citronic purchase! Welcome to the growing family of Citronic owners.  
Growing demands on music recording industry professionals have created the need for better monitor 
performance at more affordable prices.  The 170.341/344/347 Series class of Powered Studio Monitors was 
created to address these needs. Please take a few moments to review the information in this guide.  

Safety 

For your safety and to ensure correct operation of this product, please take a moment to read the safety 
precautions opposite this page. 
  

Caution  

Never remove the rear panel of these powered monitors. To do so could result in electric shock. A qualified 
technician should preform any repair or service to the electronics. 
This product is capable of producing sounds at a volume that could be damaging to hearing and result in 
permanent hearing loss over an extended period of time.  
 
 

Unpacking and Visual Inspection  

It is rare that a unit is damaged during shipping. However, if this does happen, contact shipping company 
immediately. Keep the original carton and packing material for future shipping, and to preserve your warranty!  

 

Systems Control 

 

SYSTEM VOLUME  

The input sensitivity is adjusted (counterclockwise reduces sensitivity) with the rear 
panel mounted System Gain control. Adjustment range is from -30dB to +6dB. 
Factory preset gain is +6dB, which should suffice for most conditions.  Normally 
adjustments would only be made if you're using your monitor in a surround system 
and need to balance levels or if your monitor send is too hot and not adjustable. 
 
 

Summary of Contents for 170.341







Reviews: